In how to DIY kitchen faucet repair, there are a few steps to follow! These steps are applicable on American standard faucets like Moen, Delta or Price Pfister. The water release control is the task of faucets. The design and function are important as appealing appliances that should work well. DIY or hiring professional to repair frustrating damaged faucet will require tools like pliers, wrench and screw driver. Here are the steps as instructions for you to follow!
At first, you should have to make sure in shutting the water supply from leakage before the faucet is removed. Shutting off the main valve or merely the sink valve, it is yours to decide. Then make sure about drained water line and released air pressure. Saving a lot of precious water is certainly worth.
10 Photos Gallery of: Easy to DIY Kitchen Faucet Repair Steps
The parts of the faucet can be dissembled then. The lever is to be opened and its fragments from the faucet are to be removed. Just get a new washer to replace the old one. Old or damaged screws are to be replaced by good quality and durable ones to give new look and performance.
Install and tighten the washer with the screws after fixing and reassembling the faucet. The stem thread should be lubricated by using grease. The last but not least step is that you should have to make sure the leakage has been repaired properly by turning back on the water supply.
Single handle or double handle, these steps are applicable to both of the faucets. Faucet sprayer as well that you can repair by yourself. The steps are easy to follow and you can access a diagram on internet. Or you can also check for videos on Youtube in how to DIY kitchen faucets.
Buying durable American standard faucets is best to make sure that they will not get damaged in short use. Saving time and money are worthy than buying cheap faucets but you should have to repair or even buying new ones.